ARM

ARM found 0 new drives

Server details

Datetime: 04-15-2026 17:53:07
Timezone: Etc/UTC
Python version: 3.10.12
A.R.M version: 2.22.0
Update available, Version: Unknown
Current git version: c6f7963
Total rips: 0
Movies ripped: 0
Series ripped: 0
Audio ripped: 0

Disk Drives

No drives installed on this system.

Note: Ripping does not require drives to be listed in the UI here. However, if a drive does not show up, there may be an issue with the docker container settings.

System Info and Health

Current CPU and System information - Update system information

System

Name: ARM Server
Automatic Ripping Machine main server
CPU: AMD Ryzen 5 3600 6-Core Processor
CPU Temp: 37.375°C
Usage:

0.0%

System Memory

Total: 15.5 GB
Free: 10.4 GB
Used: 4.6 GB
Usage:

33.0%

Storage

Transcode:

1.5%

Free Space: 2569.6 GB
Path: /home/arm/media/transcode/
Completed:

1.5%

Free Space: 2569.6 GB
Path: /home/arm/media/completed/

Hardware Transcoding Support

Intel QuickSync:
Nvidia NVENC:
AMD VCN:

Music Config

ABCDE Config:

# System defaults for abcde version 2.8.2
# Nothing in this file is uncommented by default.
#
# If you wish to override these system-wide settings, create your own
# .abcde.conf file in your home directory.

# CDDB options

# Choose whether you want to use "cddb", "musicbrainz" and/or
# "cdtext". Default is "musicbrainz", but all can be specified in a
# comma delimited list to be tried sequentially. All the results will
# be displayed ready for user choice.
CDDBMETHOD=musicbrainz

# If you wish to use a different CDDB server, edit this line.
# If you just wanted to use a proxy server, just set your http_proxy
# environment variable - wget will use it correctly.
#CDDBURL="https://freedb.freedb.org/~cddb/cddb.cgi"

# The CDDB protocol level.
# Right now 5 is latin1 output and 6 is UTF8 encoding.
#CDDBPROTO=6

# The CDDB protocol requires hello information, including a valid username
# and hostname. If you feel paranoid about giving away such info, edit this
# line - the format is username@hostname.
#HELLOINFO="`whoami`@`hostname`"

# This controls the email address CDDB changes are submitted to.
#CDDBSUBMIT=freedb-submit@freedb.org

# The following options control whether or not fetched CDDB entries
# are cached locally in $CDDBLOCALDIR
#CDDBCOPYLOCAL="n"
#CDDBLOCALDIR="$HOME/.cddb"
#CDDBLOCALRECURSIVE="y"

# If NOSUBMIT is set to y, then abcde will never prompt asking if you
# wish to submit your edited cddb file.
#NOSUBMIT=n

# If NOCDDBQUERY is set to y, then abcde will never even try to access
# the CDDB server; running abcde will automatically drop you into a
# blank cddb file to edit at your leisure.  This is the same as the
# -n option.  NOCDDBQUERY=y implies NOSUBMIT=y.
#NOCDDBQUERY=n

# Select here if you want to use the locally stored CDDB entries.
# This is useful if you do a lot of editing to those CDDB entries.
# Also, other tools like Grip store CDDB entries under $HOME/.cddb,
# so they can be reused when ripping CDs. (If this is set to "y" make
# sure that CDDBLOCALRECURSIVE is also set to "y".)
#CDDBUSELOCAL="n"

# List, separated with a comma, the fields we want the parsing function to
# output. Defaults to YEAR and GENRE, for a complete list of fields provided by
# CDDB.
# The fields are not case sensitive. Actually, "y,g" will work as fine as "Y,G"
# or "YEAR, GENRE"
#SHOWCDDBFIELDS=year,genre

# Specify the style of encoder to use here -
# oggenc, vorbize - for OGGENCODERSYNTAX
# lame, gogo, bladeenc, l3enc, xingmp3enc, mp3enc - for MP3ENCODERSYNTAX
# flac - the only supported for FLACENCODERSYNTAX at the moment
# speexenc - the only encoder for SPEEXENCODERSYNTAX
# mpcenc - encoder for MPCENCODERSYNTAX
# wavpack, ffmpeg - encoder for WVENCODERSYNTAX
# mac - for APENCODERSYNTAX
# fdkaac, ffmpeg, neroAacEnc, faac, qaac, fhgaacenc - for AACENCODERSYNTAX
# opusenc - for OPUSENCODERSYNTAX
# twolame, ffmpeg - for MP2ENCODERSYNTAX
# tta, ttaenc - for TTAENCODERSYNTAX
# ffmpeg - for AIFFENCODERSYNTAX
# default is a valid option for oggenc, lame, flac, speexenc, mpcenc, wavpack,
# fdkaac, opus, twolame and tta. Currently this affects the default location of the
# binary, the variable to pick encoder command-line options from, and where
# the options are given.
#MP3ENCODERSYNTAX=default
#OGGENCODERSYNTAX=default
#FLACENCODERSYNTAX=default
#SPEEXENCODERSYNTAX=default
#MKAENCODERSYNTAX=default
#MPCENCODERSYNTAX=default
#WVENCODERSYNTAX=default
#APENCODERSYNTAX=default
#AACENCODERSYNTAX=default
#OPUSENCODERSYNTAX=default
#MP2ENCODERSYNTAX=default
#TTAENCODERSYNTAX=default
#AIFFENCODERSYNTAX=default

# Specify the syntax of the normalize binary here - so far only 'normalize'
# is supported.
#NORMALIZERSYNTAX=default

# CD reader program to use - currently recognized options are 'cdparanoia',
# 'libcdio' (cd-paranoia),'icedax', 'cdda2wav', 'dagrab', 'pird',
# 'cddafs' (Mac OS X only) and 'flac'.
#CDROMREADERSYNTAX=cdparanoia

# CUE reader syntax for the CUE reader program to use.
# abcde supports 2 CUE modes: 'mkcue' and 'abcde.mkcue' so you can set the
# MKCUE variable accordingly. The 'abcde.mkcue' uses an internal
# implementation, without the need of an external program.
#CUEREADERSYNTAX=default

# Specify the program to convert a CUE sheet back to a CD disc ID for CDDB queries.
# Select between '/path/to/cue2discid' (provided as an example) or
# 'abcde.cue2discid', implemented internaly.
#CUE2DISCID=abcde.cue2discid

# Keep the wav files after encoding. Set it to "y" and remove "clean" from
# the list of default actions, since we purge the temp directory as default.
#KEEPWAVS=n

# Track padding: force abcde to pad tracks using 0, so every song uses a two
# digit entry. If set to "y", even a single song encoding outputs a file like
# 01.my_song.ext
PADTRACKS=y

# Define if you want abcde to be non-interactive.
# Keep in mind that there is no way to deactivate it right now in the command
# line, so setting this option makes abcde to be always non-interactive.
INTERACTIVE=n

# Specify 'nice'ness of the encoder, the CD reader and the distmp3 proc.
# This is a relative 'nice'ness (that is, if the parent process is at a
# nice level of 12, and the ENCNICE is set to 3, then the encoder will
# run with an absolute nice value of 15. Note also, that setting these
# to be empty will result in some default niceness increase (4 in tcsh
# and 10 using the bsdutils' nice).
#ENCNICE=10
#READNICE=10
#DISTMP3NICE=10

# Paths of programs to use

# Encoders:
#LAME=lame
#GOGO=gogo
#BLADEENC=bladeenc
#L3ENC=l3enc
#XINGMP3ENC=xingmp3enc
#MP3ENC=mp3enc
#VORBIZE=vorbize
#OGGENC=oggenc
#FLAC=flac
#SPEEXENC=speexenc
#MPCENC=mpcenc
#WVENC=wavpack
#APENC=mac
#FAAC=faac
#NEROAACENC=neroAacEnc
#FDKAAC=fdkaac
#OPUSENC=opusenc
#TWOLAME=twolame
# Note that if you use avconv rather than FFmpeg give the
# path to avconv here (e.g. FFMPEG=/usr/bin/avconv):
# FFMPEG=ffmpeg
#TTA=tta
#TTAENC=ttaenc

# The path for qaac, refalac and fhgaacenc  can be problematic as abcde
# cannot cope with the 'standard' Wine location with spaces. For example:
# "$HOME/.wine/drive_c/Program\ Files/qaac/qaac.exe" is problematic. Try instead:
# "$HOME/.wine/drive_c/qaac/qaac.exe"
# Installation instructions for qaac, refalac and fhgaacenc here:
#    https://www.andrews-corner.org/linux/qaac.html
#    https://www.andrews-corner.org/linux/fhgaacenc.html
# (Hint: Use QAAC=refalac to use the Open Source alac encoder...)
#QAAC=qaac
#FHGAACENC=fhgaacenc

# Taggers, rippers, replaygain etc:
#ID3=id3
#ID3V2=id3v2
#MID3V2=mid3v2
#EYED3=eyeD3
#CDPARANOIA=cdparanoia
#CD_PARANOIA=cd-paranoia
#CDDA2WAV=icedax
#PIRD=pird
#CDDAFS=cp
#CDDISCID=cd-discid
#CDDBTOOL=cddb-tool
#MD5SUM=md5sum
#DISTMP3=distmp3
#VORBISCOMMENT=vorbiscomment
#METAFLAC=metaflac
#NORMALIZE=normalize-audio
#CDSPEED=eject
#VORBISGAIN=vorbisgain
#MKCUE=mkcue
#MKTOC=cdrdao
#DIFF=diff
#WVGAIN=wvgain
#WVTAG=wvtag
#APETAG=apetag
#GLYRC=glyrc
#IDENTIFY=identify
#CONVERT=convert
#DISPLAYCMD=display
#WINE=wine

# Options to call programs with:

# If HTTPGET is modified, the HTTPGETOPTS options should also be defined
# accordingly. If HTTPGET is changed, the default options will be set,
# if HTTPGETOPTS is empty or not defined.
#HTTPGET=wget
# for fetch (FreeBSD): HTTPGETOPTS="-q -o -"
# for wget: HTTPGETOPTS="-q -nv -O -"
# for curl (MacOSX): HTTPGETOPTS="-f -s"
#HTTPGETOPTS="-q -O -"

# MP3:
# For the best LAME encoder options have a look at:
# <https://wiki.hydrogenaudio.org/index.php?title=LAME#Recommended_encoder_settings>
# A good option is '-V 0' which gives Variable Bitrate Rate (VBR) recording
# with a target bitrate of ~245 Kbps and a bitrate range of 220...260 Kbps.
#LAMEOPTS=
#GOGOOPTS=
# Bladeenc still works with abcde in 2015, and the last release of bladeenc
# was in 2001! Settings that will produce a great encode are: '-br 192' 
#BLADEENCOPTS=
# L3enc still works with abcde in 2015, pretty amazing when you realise 
# that the last release of l3enc was in 1997! Settings that will produce 
# a great encode are: '-br 256000 -hq -crc'
#L3ENCOPTS=
#XINGMP3ENCOPTS=
# And mp3enc also still works with abcde in 2015 with the last release
# of mp3enc in 1998! Settings that will produce a great encode, albeit
# a slow one, are: '-v -br 256000 -qual 9 -no-is -bw 16500'
#MP3ENCOPTS=

# Ogg:
#VORBIZEOPTS=
#OGGENCOPTS=

# FLAC:
# The flac option is a workaround for an error where flac fails
# to encode with error 'floating point exception'. This is flac 
# error in get_console_width(), corrected in flac 1.3.1
#FLACOPTS="--silent"
# Options passed to MetaFlac for ReplayGain tags:
#FLACGAINOPTS="--add-replay-gain"
# Speex:
#SPEEXENCOPTS=

# MPP/MP+ (Musepack):
# For the encoder options look at 'mpcenc --longhelp', consider
# setting '--extreme' for a good quality encode.
#MPCENCOPTS=

# WavPack:
# Look at 'wavpack --help' for detailed options, consider using '-hx3' 
# for a good quality encode
#WAVENCOPTS=
# For Wavpack replay gain we set both the default of 'track gain' 
# as well as this option for 'album gain'. Better media players
# such as vlc can select either or neither.    
#WVGAINOPTS='-a'

# Monkey's Audio (ape)
# Without this set mac chokes unfortunately. Choices
# are from 1000 to 5000.
#APENCOPTS='-c4000'

#AIFF
# These options needed by FFmpeg for tagging and selection of id3v2 version:
#  1. '-write_id3v2 1' allows id3v2 tagging while '-write_id3v2 0' disables tagging
#  2. '-id3v2_version 4' gives version id3v2.4 while '3' gives id3v2.3 
#AIFFENCOPTS="-write_id3v2 1 -id3v2_version 4"

# M4A/AAC
# There are now 6 AAC encoders available to abcde, the default being
# fdkaacenc. Note that the old AACENCOPTS has been rendered obsolete by
# the following options, new to abcde 2.7:
#  1. fdkaac: see 'fdkaac --help' and consider using 
#     '--profile 2 --bitrate-mode 5 --afterburner 1'
#     for a good quality encode. 
#FDKAACENCOPTS='--bitrate 192k'
#  2. FFmpeg: Use the following to use the FFmpeg native encoder, adding
#     -strict -2 if you have an older FFmpeg:
#     FFMPEGENCOPTS="-c:a aac -b:a 192k"
#  3. neroAacEnc: see 'neroAacEnc -help' and
#     consider using '-q 0.65' for a good quality encode.
#NEROAACENCOPTS=
#  4. faac: see 'faac --long-help' and consider
#     using '-q 250' for a good quality encode.
#FAACENCOPTS=
#  5. qaac: simply run 'wine qaac.exe' to see all options and
#     consider using '--tvbr 100' for a good quality
#     encode or '--alac' for Apple Lossless Audio Codec
#QAACENCOPTS=
#  6. fhgaacenc: simply run 'wine fhgaacenc.exe' to see all options.
#     consider using '--vbr 4' for a decent quality encode.
#FHGAACENCOPTS=

# True Audio
# This is a lossless format so no options of any note available:
#TTAENCOPTS=

# OPUS
# For the encoder options look at: 'opusenc -h'
#OPUSENCOPTS=

# MP2
# Currently uses either twolame or ffmpeg, for twolame options look at:
# 'twolame --help',a highly recommended setting is "--bitrate 320".
#TWOLAMENCOPTS=

# FFmpeg or avconv can be used for several audio codecs, as well as being
# the default encoder for the Matroska container mka::
# 1. Encoding to WavPack (FFmpeg only: avconv does not have a native encoder).
#    Consider setting the following with a compression_level between 0-8:
#    FFMPEGENCOPTS="-c:a wavpack -compression_level 6"
# 2. Encoding to ALAC (both FFmpeg and avconv have a native encoder).
#    Consider using the following for either FFmpeg and avconv:
#    FFMPEGENCOPTS="-c:a alac"
# 3. Encoding to mp2
#    Consider using the following for either FFmpeg and avconv:
#    FFMPEGENCOPTS="-c:a mp2 -b:a 320k"
#FFMPEGENCOPTS=

# mp3 tagging:
# There are three ways to tag MP3 files:
#   1. id3v1 (with id3)
#   2. id3v2.3 (with id3v2)
#   3. id3v2.4 (with eyeD3) This is the default
# Use ID3TAGV to select one of the older formats:
#ID3TAGV=id3v2.4
#ID3OPTS=
#ID3V2OPTS=
#EYED3OPTS="--set-encoding=utf16-LE"

# Other options:
# The variable CDPARANOIOPTS is also used by GNU's cd-paranoia,
# so use this when setting CDROMREADERSYNTX=libcdio.
#CDPARANOIAOPTS=
#CDDA2WAVOPTS=
#PIRDOPTS="-p"
# Options for the CD ripper dagrab can be seen by running 'dagrab -h'.
# A good option to experiment with is the 'sectors per request' setting
# which by default is '-n 8'.
#DAGRABOPTS=
#CDDAFSOPTS="-f"
#CDDBTOOLOPTS=
#EJECTOPTS=
#DISTMP3OPTS=
#NORMALIZEOPTS=
#CDSPEEDOPTS="-x"
#CDSPEEDVALUE=""
#MKCUEOPTS=""
#MKTOCOPTS=""
#DIFFOPTS=""
#VORBISCOMMENTOPTS="-R"
#METAFLACOPTS="--no-utf8-convert"
# Bear in mind that the AtomicParsley option '--overWrite' is already
# used in abcde...
#ATOMICPARSLEYOPTS=

# Actions to take
# Comma-separated list of one or more of the following:
#  cddb,cue,read,normalize,encode,tag,move,replaygain,playlist,getalbumart,embedalbumart,clean,default
#   encode implies read
#   normalize implies read
#   tag implies cddb,read,encode
#   move implies cddb,read,encode,tag
#   replaygain implies cddb,read,encode,tag,move
#   playlist implies cddb
#   embedalbumart implies getalbumart
# An action can be added to the "default" action by specifying it along with
# "default", without having to repeat the default ones:
#  ACTIONS=default,playlist
# The default action list (referenced as "default") is defined in the following
# comment:
ACTIONS=musicbrainz,read,encode,tag,move,clean,playlist,getalbumart,embedalbumart

# CD device you want to read from
# It can be defined as a singletrack flac file, but since it might change from
# file to file it makes little sense to define it here.
#CDROM=/dev/cdrom
# If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
# If we are using the ide-scsi emulation layer, we need to define a "g"
#CDPARANOIACDROMBUS="d"

# If you'd like to make a default location that overrides the current
# directory for putting mp3's, uncomment this.
# OUTPUTDIR="$home/music/"
OUTPUTDIR="/home/arm/music/"

# Or if you'd just like to put the temporary .wav files somewhere else
# you can specify that here
#WAVOUTPUTDIR=`pwd`

# OUTPUTTYPE can be any of a number of formats, either a single format
# (e.g. "ogg") or a combination of them separated with ","
# (e.g. "flac,mp3"). Currently recognised and supported are:
# "flac", "m4a", "mp3, "mpc", "ogg", "opus", "mka", "spx", "vorbis", "wav", "wv", "ape", "aiff"
#OUTPUTTYPE=ogg

# Output filename format - change this to reflect your inner desire to
# organize things differently than everyone else :)
# You have the following variables at your disposal:
# OUTPUT, GENRE, ALBUMFILE, ARTISTFILE, TRACKFILE, TRACKNUM and YEAR.
# Make sure to single-quote this variable. abcde will automatically create
# the directory portion of this filename.
# NOTICE: OUTPUTTYPE has been deprecated in the OUTPUTFORMAT string.
# Since multiple-output was integrated we always append the file type
# to the files. Remove it from your user defined string if you are getting
# files like ".ogg.ogg".
OUTPUTFORMAT='${ARTISTFILE}/${ALBUMFILE}/${TRACKNUM} - ${TRACKFILE}'
#OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'

# Like OUTPUTFORMAT but for Various Artists discs.
VAOUTPUTFORMAT='Various ${ALBUMFILE}/${TRACKNUM} ${ARTISTFILE} ${TRACKFILE}'

# Like OUTPUTFORMAT and VAOUTPUTFORMAT but for the ONEFILE rips.
ONETRACKOUTPUTFORMAT=$OUTPUTFORMAT
VAONETRACKOUTPUTFORMAT=$VAOUTPUTFORMAT

# Define how many encoders to run at once. This makes for huge speedups
# on SMP systems. Defaults to 1. Equivalent to -j.
MAXPROCS=4

# Support for systems with low disk space:
# n:	Default parallelization (read entire CD in while encoding)
# y:	No parallelization (rip, encode, rip, encode...)
#LOWDISK=n

# If set to y, enables batch mode normalization, which preserves relative
# volume differences between tracks of an album.
#BATCHNORM=n

# Enables nogap encoding when using the 'lame' encoder.
#NOGAP=y

# Set the playlist file location format. Uses the same variables and format
# as OUTPUTFORMAT. If the playlist is specified to be in a subdirectory, it
# will be created for you and the playlist will reference files from that
# subdirectory.
#PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
# If you want to prefix every filename in a playlist with an arbitrary
# string (such as 'https://you/yourstuff/'), use this option
#PLAYLISTDATAPREFIX=''

#Like PLAYLIST{FORMAT,DATAPREFIX} but for Various Artists discs:
#VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
#VAPLAYLISTDATAPREFIX=''

#This will give the playlist CR-LF line-endings, if set to "y".
#(some hardware players insist on CR-LF line-endings)
#DOSPLAYLIST=n

# album art download options (see glyrc's help for details with more detailed 
# examples here: https://github.com/sahib/glyr/wiki/Commandline-arguments).
# For example use '--formats jpg;jpeg' to only search for JPEG images
# These options: '--from <provider>' and '--lang <langcode>' might also be useful
#GLYRCOPTS=
#ALBUMARTFILE="cover.jpg"
#ALBUMARTTYPE="JPEG"

# Options for ImageMagick commands used by album art processing when available
# For example: CONVERTOPTS="-colorspace RGB -resize 600x600>"
# to make the image RGB and fit inside 600x600 while keeping the aspect ratio
#IDENTIFYOPTS=
#CONVERTOPTS=
#DISPLAYCMDOPTS="-resize 512x512 -title abcde_album_art"
# By default convert is only called when the image type is different from
# ALBUMARTTYPE, use ALBUMARTALWAYSCONVERT="y" to always call convert
#ALBUMARTALWAYSCONVERT="n"

# Custom filename munging:
# By default, abcde will do the following to CDDB data to get a useful filename:
# 1. Delete any dots preceding the title (first sed command)
# 2. Replace all spaces with an underscore (second sed command). Simply remove
#   this if you prefer spaces.
# 3. Delete a grab bag of characters which variously Windows and Linux do not permit 
#   (tr command). Remove any of these from the list if you wish to actually use them.
#   
mungefilename ()
{ 
    echo "$@" | sed s,:,\ -,g | sed s,/,-,g | tr -d \?\[:cntrl:\] 
}
#mungefilename ()
#{
#	echo "$@" | sed -e 's/^\.*//' -e 's/ /_/g' | tr -d ":><|*/\"'?[:cntrl:]"
#}
#
# More examples for custom filename munging:
#
# VARIANT 1: (works anywhere style)
#
# Translate everything to lowercase
# replace ALL chars that may cause trouble for Linux, Windows and DOS
# with '_' (underscore); remove double underscores; remove leading and
# trailing underscores; recode to flat ASCII
#
#mungefilename ()
#{
#	echo "$@" | tr [A-Z] [a-z] | \
#			sed "s/[- ,.:\'\/!@#\?\$%\^&()]/_/g" | \
#			sed 's/_[_]*/_/g' | \
#			sed 's/^_*//' | \
#			sed 's/_*$//' | \
#			recode -f iso8859-1..flat
#}
#
# VARIANT 2: (legible style)
#
# Accept all chars, EXCEPT '/' (obvious) or ":" (because eyeD3 cannot
# cope with ":" in pathnames): replace them with " " (space).
# Additionally, replace contiguous spaces with one space; strip
# leading spaces; strip trailing spaces and recode to flat filenames.
#
#mungefilename ()
#{
# 	echo "$@" |	sed "s/[:\/]/ /g" | \
# 			sed 's/ [ ]*/ /g' | \
# 			sed 's/^ *//' | \
# 			sed 's/ *$//' | \
#}

#
# Custom filename munging specific to track names:
# By default this function will call the mungefilename function.
#mungetrackname ()
#{
#	mungefilename $@
#}
#
# Custom filename munging specific to artist names:
# By default this function will call the mungefilename function.
#mungeartistname ()
#{
#	mungefilename $@
#}
#
# Custom filename munging specific to album names:
# By default this function will call the mungefilename function.
#
# Adjust albumname to not overwrite "Unkown Album" folders
# for subsequent unknown discs.
# 
ID_SUFFIX=$(cd-discid $CDROM | cut -f1 -d ' ')
mungealbumname ()
{
        mungefilename $(echo "$@" | sed s,'Unknown Album','Unknown Album_'$ID_SUFFIX,g)
}

# Custom genre munging:
# By default we just transform uppercase to lowercase. Not much of a fancy
# function, with not much use, but one can disable it or just turn the first
# Uppercase.
#mungegenre ()
#{
#	echo $CDGENRE | tr "[:upper:]" "[:lower:]"
#}

# Custom pre-read function
# By default it does nothing.
# You can set some things to get abcde function in better ways:
# * Close the CD tray using eject -t (if available in eject and supported by
#   your CD device.
# * Set the CD speed. You can also use the built-in options, but you can also
#   set it here. In Debian, eject -x and cdset -x do the job.
# KEEP IN MIND that executables included in pre_read must be in your $PATH or
# you have to define them with full /path/to/binary
# Uncomment and substitute the ":" with your commands.
#pre_read ()
#{
#:
#}

# Custom post-read function
# By default it does nothing.
# You can set some things to get abcde function in better ways:
# * Store a copy of the CD TOC.
# KEEP IN MIND that executables included in post_read must be in your $PATH or
# you have to define them with full /path/to/binary
# Uncomment and substitute the ":" with your commands.
#post_read ()
#{
#:
#}

# post_encode
# By default it does nothing.
# You can set some things to get abcde function in better ways:
# * Move the resulting directory over the network
# * Compare results with a previously made run, for tests
# KEEP IN MIND that executables included in post_encode must be in your $PATH or
# you have to define them with full /path/to/binary
# Uncomment and substitute the ":" with your commands.
#post_encode ()
#{
#:
#}

# If you'd like to have abcde eject the cdrom after all the tracks have been
# read, uncomment the following line.
#EJECTCD=y

# To encode on the remote machines foo, bar, baz, quux, and qiix, as well as
# on the local machine (requires distmp3 to be installed on local machine and
# distmp3host to be installed and running on all remote machines - see README)
#REMOTEHOSTS=foo,bar,baz,quux,qiix

# Set to 1,2, etc. to obtain some information about actions happening in the background
# Useful if you have a slow network or CDDB servers seem unresponsive.
#EXTRAVERBOSE=0

Ripper ARM Settings

ARM_NAME:

ARM_CHILDREN:

PREVENT_99:

ARM_CHECK_UDF:

UMASK:

GET_VIDEO_TITLE:

ARM_API_KEY:

DISABLE_LOGIN:

SKIP_TRANSCODE:

VIDEOTYPE:

MINLENGTH:

MAXLENGTH:

MANUAL_WAIT:

MANUAL_WAIT_TIME:

DATE_FORMAT:

ALLOW_DUPLICATES:

MAX_CONCURRENT_TRANSCODES:

MAX_CONCURRENT_MAKEMKVINFO:

DATA_RIP_PARAMETERS:

METADATA_PROVIDER:

GET_AUDIO_TITLE:

RIP_POSTER:

UNIDENTIFIED_EJECT:

AUTO_EJECT:

ABCDE_CONFIG_FILE:

RAW_PATH:

TRANSCODE_PATH:

COMPLETED_PATH:

EXTRAS_SUB:

INSTALLPATH:

LOGPATH:

LOGLEVEL:

LOGLIFE:

DBFILE:

WEBSERVER_IP:

WEBSERVER_PORT:

UI_BASE_URL:

SET_MEDIA_PERMISSIONS:

CHMOD_VALUE:

SET_MEDIA_OWNER:

CHOWN_USER:

CHOWN_GROUP:

MAKEMKV_PERMA_KEY:

RIPMETHOD:

RIPMETHOD_DVD:

RIPMETHOD_BR:

MKV_ARGS:

DELRAWFILES:

HB_PRESET_DVD:

HB_PRESET_BD:

DEST_EXT:

HANDBRAKE_CLI:

HANDBRAKE_LOCAL:

MAINFEATURE:

HB_ARGS_DVD:

HB_ARGS_BD:

FFMPEG_CLI:

FFMPEG_LOCAL:

FFMPEG_PRE_FILE_ARGS:

FFMPEG_POST_FILE_ARGS:

USE_FFMPEG:

EMBY_REFRESH:

EMBY_SERVER:

EMBY_PORT:

EMBY_CLIENT:

EMBY_DEVICE:

EMBY_DEVICEID:

EMBY_USERNAME:

EMBY_USERID:

EMBY_PASSWORD:

EMBY_API_KEY:

NOTIFY_RIP:

NOTIFY_TRANSCODE:

NOTIFY_JOBID:

PB_KEY:

IFTTT_KEY:

IFTTT_EVENT:

PO_USER_KEY:

PO_APP_KEY:

BASH_SCRIPT:

OMDB_API_KEY:

TMDB_API_KEY:

JSON_URL:

APPRISE:

UI Notification Settings

index_refresh:

Notification Timeout:

use_icons:

save_remote_images:

bootstrap_skin:

language:

database_limit:

Apprise Notification Service

Send messages from ARM to mulitple services at once using apprise. Set the required fields below, then point the service to the configuration file. ARM by default in docker loads the apprise configuration to '/etc/arm/config/apprise.yaml'

Send Test Notification

BOXCAR_KEY:

BOXCAR_SECRET:

DISCORD_WEBHOOK_ID:

DISCORD_TOKEN:

FAAST_TOKEN:

FLOCK_TOKEN:

GITTER_TOKEN:

GITTER_ROOM:

GOTIFY_TOKEN:

GOTIFY_HOST:

GROWL_HOST:

GROWL_PASS:

JOIN_API:

JOIN_DEVICE:

KODI_HOST:

KODI_PORT:

KODI_USER:

KODI_PASS:

KUMULOS_API:

KUMULOS_SERVERKEY:

LAMETRIC_MODE:

LAMETRIC_API:

LAMETRIC_HOST:

LAMETRIC_APP_ID:

LAMETRIC_TOKEN:

MAILGUN_DOMAIN:

MAILGUN_USER:

MAILGUN_APIKEY:

MATRIX_HOST:

MATRIX_USER:

MATRIX_PASS:

MATRIX_TOKEN:

MSTEAMS_TOKENA:

MSTEAMS_TOKENB:

MSTEAMS_TOKENC:

NEXTCLOUD_HOST:

NEXTCLOUD_ADMINUSER:

NEXTCLOUD_ADMINPASS:

NEXTCLOUD_NOTIFY_USER:

NOTICA_TOKEN:

NOTIFICO_PROJECTID:

NOTIFICO_MESSAGEHOOK:

NTFY_TOPIC:

NTFY_URL:

NTFY_PORT:

NTFY_USER:

NTFY_PASS:

OFFICE365_TENANTID:

OFFICE365_ACCOUNTEMAIL:

OFFICE365_CLIENT_ID:

OFFICE365_CLIENT_SECRET:

POPCORN_API:

POPCORN_EMAIL:

POPCORN_PHONENO:

PROWL_API:

PROWL_PROVIDERKEY:

PUSHJET_HOST:

PUSHJET_SECRET:

PUSH_API:

PUSHED_APP_KEY:

PUSHED_APP_SECRET:

PUSHSAFER_KEY:

ROCKETCHAT_HOST:

ROCKETCHAT_USER:

ROCKETCHAT_PASS:

ROCKETCHAT_WEBHOOK:

RYVER_ORG:

RYVER_TOKEN:

SENDGRID_API:

SENDGRID_FROMMAIL:

SIMPLEPUSH_API:

SLACK_TOKENA:

SLACK_TOKENB:

SLACK_TOKENC:

SLACK_CHANNEL:

SPARKPOST_API:

SPARKPOST_HOST:

SPARKPOST_USER:

SPARKPOST_EMAIL:

SPONTIT_API:

SPONTIT_USER_ID:

TELEGRAM_BOT_TOKEN:

TELEGRAM_CHAT_ID:

TWIST_EMAIL:

TWIST_PASS:

XBMC_HOST:

XBMC_PORT:

XBMC_USER:

XBMC_PASS:

XMPP_HOST:

XMPP_PASS:

XMPP_USER:

WEBEX_TEAMS_TOKEN:

ZILUP_CHAT_TOKEN:

ZILUP_CHAT_BOTNAME:

ZILUP_CHAT_ORG:

Get help

Github

Discord

A.R.M Wiki

ARM found 0 new drives

Settings were saved successfully

There was an error saving settings

System Info and Health

Usage:

Usage:

Transcode:

Completed:

Music Config

Ripper ARM Settings

UI Notification Settings

Apprise Notification Service